Slide rails, also known as guide rails and slide rails, refer to the hardware connection parts that are fixed to the cabinet of the furniture and are used for moving in and out of the drawers or panels of the furniture. Drawer connection for furniture such as steel drawers. The slide rails are classified into gear type, roller type, steel ball type and damping type. If the hinge is the heart of the cabinet, then the slide is the kidney. For example, whether those large and small drawers can be pushed and pulled smoothly and load-bearing are all supported by the slide rails. From the current technology point of view, the bottom slide rail is better than the side slide rail, and the overall connection with the drawer is better than the three-point connection. The materials, principles, structures, and craftsmanship of drawer slides vary widely. High-quality slides have low resistance, long life, and smooth drawers. Sometimes when the slide rail is pulled, there are problems such as sound or resistance, so in order to solve these problems, it is necessary to use the slide rail to silence the slide grease, which is a solid state.

98彩票 BSR-620 slide rail muffler grease is prepared by special polymer materials, compound additives and double compound saponification technology. It has the characteristics of good adhesion, high viscosity index, lubricity, chemical stability and good mechanical stability. Specially used for lubrication, noise reduction and damping of various slide rails, casters, and various shafts. Bearing oil

Performance characteristics

98彩票1.High adhesion

2.Insoluble in water and most organic solvents

3.Can better correct machining errors

98彩票4. Appearance is light-colored and transparent, odorless, meets RoaHs requirements

98彩票5, smooth and smooth, no breakpoints and intermittent feeling, better silencer effect

6.Excellent vibration damping, buffering, lubrication, sealing, noise reduction and damping performance

7. When the slide rail is gently pulled, it has a very soft rebound feel, showing the high-end of the slide rail.

8. Good low temperature lubricity. At low temperatures, the slide rails have no oil-free and dry feeling, and the minimum operating temperature can reach ﹣25 ° C (based on the inner rail can be pulled)

98彩票Recommended Use 

Lubrication, noise reduction and damping of various linear and ball slides, casters and shafts

Instructions 

98彩票Make sure the parts are clean and dry before adding grease

Improper application may cause poor muffler effect

98彩票Can be filled with a grease injection machine or manual grease gun to ensure the cleanliness of the grease injection process

After the grease injection assembly is completed, run or run properly to make the oil film on the component surface uniform

98彩票lubricating oil